01-13-2014, 04:08 PM
|
#26
|
Lieutenant Colonel
Drives: Sprint car
Join Date: May 2013
Location: California
|
27c6 - P2096
27C6 - P2096
27C6 - P2096 | | Information saved in | DME | Fault code | 27C6 - P2096 | Fault text | Oxygen sensor, adaptation, trim control, bank 1 | Fault description | Post Catalyst Fuel Trim System Too Lean (Bank 1) | Condition for fault identification | Test condition: Adaptation value reaches MIN limit and hangs in this position | . | Terminal condition: Engine running | . | Voltage condition: Battery voltage > 9.8V (k_diag_tr_ub_min) | Condition for fault memory entry | Counter for recognition at adaptation limit >= (2x) K_LA_TRIM_DIAG_I_AD_MAX_SCHW | Action in service | 1. Check the fuel system and the exhaust system for leaks | . | 2. Check pre-cat and post-cat sensors and replace as indicated | Fault effect and breakdown warning | MIL on after engine runs 2x | Driver information | Warning light: MIL | Service instruction | none |
Last edited by regular guy; 01-21-2014 at 06:55 PM..
|
|
|