View Single Post
      10-18-2020, 06:03 PM   #32

Drives: '09 M3
Join Date: Dec 2007
Location: SC

iTrader: (4)

My set up not as radical as what most of you are running but my tried and true set-up for me for track. Have monoballs up front, solid subframe bushings rear, Fall-lIne toe arms in rear, Fall-line solid camber shim kit, rest of suspension is stock (except for shocks/struts).

Front Camber -3.5 degrees
Rear Camber -2.25 degrees

Front toe 1/16" total toe, OUT
Rear toe 1/16" total toe, IN

Toe is old school with toe plates, but car tracks straight and I have everything marked so I can switch from street to track settings. This is my street car too, but I wouldn't run this set up long-term for street use with above alignment settings.