Quote:
Originally Posted by dcstep
Where do these old wives tales come from? Skipping gears has no impact on the transmission when done properly. I've got over 1-million miles of skipping gears with no ill effects. Around town I do 1-3 pretty often when I'm in no hurry. Going the other way I might jump from 6th to 3d if I really need to hot-foot it.
Any resistance going from first to second in a healthy transmission is due to mismatch of engine and tranny speed. For instance, if you gently accelerate to 5000 rpm in first and then shift to second, the engine speed will need to drop to around 3000. There'll be resistance if you try to push it in at 4000 or wait until 2000 rpm.
If you go up to 2000 rpm and do the shift and wait a full second, that might cause resistance, but shouldn't result in a grind.
Dave
|
Maybe the clunk is happening because I'm short-shifting? I'm shifting from 1st to 2nd between 2500-3000 rpm. Perhaps that's too low? But I don't want to draw alot of attention going up to 4k rpm just trying to keep up with traffic.