Quote:
Originally Posted by elim11
R:-3.3 camber 0 toe front
F : -2.4 camber 1/8" toe in
Spec by west end alignment. Car is easily controllable in the corners . Would recommend
|
I think you have the R and F reversed.
F -3.3
R -2.4
OP - I would recommend swapping a shorter main spring in the front for better wheel clearance. Eibach 140mm length, 60mm diameter in the spring rate that came with your version of CS (it's stamped on your KW spring). If not you will need a front spacer. Plus you can fit wider 10.5" wheels in the future. Doing the swap now will save you the labor of pulling the suspension out to do it later.