|
yup, buy a torx to drive in there to get it out and then buy a new one.
another way is to drill a small hole toward the edge of the drain plug. the hole only needs to be big enough and deep enough to get a pointed drift into the hole. then just hammer away at the drift at an angle tangential to the direction the plug will start unscrewing counter clockwise. Hope that makes sense. I have done it, but maybe easier to do than type in any way that makes sense.
__________________
Stoptech 380mm/355mm | PFC08 / Pagid RS-29 | Akrapovic EVO - CF tips | Benvo Tune | MS UDP | AA air filter | MCS 2-way with 700/1000lb springs | Solid bushings and adjustable links | RD front swaybar | Apex EC-7 18x10 square 275/35-18 NT01 | Turner Race Studs | GT4 Brake Cooling | GT4 Power Steering Cooling | Alekshop Oil Cooler | Performance Steering Wheel | | CF Spoiler | Varis System 1 Full CF Diffuser | Extended Paddle Shifters | Schroth Quick Fit Pro | Turner Steering Rack Stops | Vorshlag Camber Plates
|