Quote:
Originally Posted by frN54
I have removed my p2000 and unfortunately the K-CAN errors are still present. I believe that a control unit or component has been broken.
I sometimes get the K-CAN errors cleared, but after a drive they are usually back.
I never had such problems before the p2000.
I'll try to systematically remove the components that are related to the p2000, clear the errors and see if they come back.
really annoying because the p2000 worked well
|
I'm having some weird problems too, with the new P2000!
Dash light on 4x4, ABS, brake, Emerg EWS - this is after changing the parking condition from gear position to parking key, not sure if related.
I locked the car, waited for several minutes, then the error seems to have gone away on startup. Then it came back again within half a mile of driving.
I changed the parking condition back to gear position, then parked it overnight. I drove for a while today and it seemed ok, but who knows. Will update the thread if I find anything. Might be time to get a canbus debugger or something.