21. Since OBDII port doesn't have two needed wire to connect
A1 and
A2 I decided to use cigaret lighter as the power source. I have something else taped into this power source so don't pay attention to the Red and Black wires. You need to tap
A2 Braun wire in to thick Braun wire and
A1 Green/Braun into thick Red/Black wire on your cigaret lighter connector.
22. Now you can put everything back together. Connect your battery after you are done with everything, start your car and you should get this
Read the Manual that came with your new PSW to set it the way you like !
I hope this will help
PDF FILE HERE