Quote:
Originally Posted by Bartledoo
.2 degrees total toe-in is ~3/32" with 275/35 tires. Not super aggressive.
Reason I asked about sliding - if you're sliding around a lot with the inside tire only partially on the ground (because it is effectively at a massive positive camber in relation to the lateral motion) it will destroy it pretty quickly if you're on an abrasive track. I had to stop having so much powersliding fun when I moved to softer tires. Otherwise, the rears would get destroyed in a tapered fashion within a few sessions at my primary tire eating track. Same thing with wheel spin, particularly inside wheel spin in slower corners.
|
Hmm, the calculator I used (which likely would be wrong), said it was 1/4in per side (0.1degree per side). I've always worked in inches for toes angles, so the degrees mean absolutely nothing to me.
If that's the case though, then yeah, that's not much.