Quote:
Originally Posted by san40k
I'm trying to enable FRM on my non-M manual E90 without i-drive and coded KOMBI, don't need to code CIC/CCC and don't know what do I do about DSC module. I do have this in my DSC, should I change it to wert_00 to enable FRM?
C0C_RPA
wert_01
The only other "RPA" option in my DSC is:
C0C_RPA_SCHWELLE
wert_00
wert_02
|
Change C0C_RPA - wert_00
You should be able to leave C0C_RPA_SCHWELLE alone. That is the threshold to trigger the flat.