[inandout]

Whoa....

Originally Posted by nowaym3

we all know that every one is on the jock of adv1, maybe its time to pass the word around " other forums " that his wheels are cracking because the lack of engineering. The problem with the wheels is that the bolt circle on the center and the bolt circle on the barrels doesn't match, the bolts go in at an angle causing the in and outer sections to flex and eventually crack. Adv1 was informed by their parts manufacturer that this was a big problem and would cause BIGGER problems and decided to let it go in hopes that it was an isolated incident. Apparentley not from these pics...

Originally Posted by nowaym3

Mike, the owner of triangle Tool who makes your step lip parts made ADV1 aware of this problem, and ADV1 had to waive Triangle of Responsibility.

Originally Posted by nowaym3

Lets say that the during the T6 treatment, there was a small batch that weren't heated properly. Triangle wouldn't have sold you the batch and the parts would never have made it onto your wheels. But thats not what happened. You were FULLY aware that your centers were machined to the incorrect specs and decided to Jerry Rig the barrels to fit the centers. The fault is not on the barrels, they were properly made, the fault lies with ADV1 soley. You knew there was an issue and decided to ignore it.

Originally Posted by ADV.1 Matt

Nowaym3 - Do you work for Triangle?

Originally Posted by nowaym3

No, but it is evident that the amount of technical specs i know about ADV1 wheels makes you uncomfortable.