Quote:
Originally Posted by tdott
Basically you want to connect another device to the MOST bus, so that should not be a problem as long as that device doesn't emulate the CD Changer like the 12Volt unit does, as you probably can't have two devices doing that at the same time.
That connector however could be just pre-wired and not currently connected to the MOST bus if it was just dangling there and never had anything connected to it, if it was connected to the MOST bus then other devices would not work when the ring is broken, so you'd need a MOST termination loop plugged in there to get everything working. The 12volt unit comes with a termination loop to plug in if you had a cd changer and went to disconnect it.
You would need to either connect that pre-wired MOST wire to the MOST ring behind the glovebox, or like the 12volt unit does, split another active MOST connection, like the TCU/MULF/Combox in the trunk. Either option should work for you to add something to the MOST bus.
|
Bringing this back up.
Update!
So it works. You need to reconfigure the most ring and code vehicle to Top Hifi
