Quote:
Originally Posted by PYE46M3
I did my spark plugs today and was able to get a couple easy ones off by coat hanger and a couple by hand. The passenger rear was actually one of the easiest ones to pop up for me. I used a small pry bar with leverage like this and it easily popped right out. The whole job took me about 2 hours so It can definitely be done in a half a day.
Attachment 2302306
The pry bar I used is the smallest one in this set: https://www.harborfreight.com/4-piec...-set-1654.html
hope this helps anyone who attempts this in the future.
|
You got lucky, that is a good way to snap off the top of the coil pack and also snap the plastic oil separator/pressure regulator on the top of the valve cover you are prying against.