Quote:
Originally Posted by kenwelch
It is in the intake air duct next to the oil filter cover. The code is for Intake-air temperature sensor, plausibility so BEFORE buying a new sensor check the electrical connector and wiring at the sensor.
1. Push the metal clip retainer and unplug.
2. Inspect the connector pins on both sides of the connection.
3. Reconnect and clear codes.
4. Drive the vehicle to see if the code returns or monitor the data for the intake air temp to see if it matches reality. Do the readings seem plausible. You will need a scantool that can read data or just drive it to see if the code returns.
|
How do you remove this sensor from the plenum if I may ask?