Quote:
Originally Posted by swisscheese
Looks killer man!!
May I know the specs of this rims please?
Is it on stock suspension or EDC?
Any spacers?
I have a 2010 comp pack looking to get this exact fitment.
|
Definitely! This car is running an aggressive square wheel setup in terms of effective offset front and rear. Here are the details:
Front:
18x10" ET25 EC-7 wheels in Race Silver
275 Nexen Tires
15mm front spacer
Rear:
18x10" ET25 EC-7 wheels in Race Silver
285 Nexen Tires
20mm rear spacer
For suspension they are running a KW HAS Sleeve kit.
We generally don't recommend running a staggered tire fitment on a square wheel setup as you lose the ability to rotate wheels and tires between the front and rear axle. The spacers used here might also cause rubbing especially when lowered as they are quite aggressive.
The KW HAS kit limits inner clearance in the wheelwell so a front spacer will definitely be required with these wheels. You may not need the 15mm that he is running, but it will require at least a 5mm spacer to clear the HAS kit in the front. Alternatively, you can use an 18x9.5 ET22 up front to gain the additional inner clearance needed for the HAS kit.
Here is a rear shot of this car as well:
-Tom