View Single Post
      06-14-2017, 10:31 AM   #1
SYT_Shadow
///M Powered for Life
SYT_Shadow's Avatar
11478
Rep
10,328
Posts

Drives: E90M/E92M/M4GTS/M4GT4/X5M
Join Date: Sep 2010
Location: Greenwich, CT

iTrader: (2)

BK harness and seat mounts plus carrying wheels to the track

All

I wanted to share this with you because I think it's a huge deal.


Some of you may have followed my saga HERE with mounting race seats to my E92 that allow 3 points as well as the 6 points.

To sum up, the MS hardware is not made for this car despite claims to the contrary and simply doesn't function as intended. I had to ghetto mod several things to achieve a simple goal: allow 3+6points in the car. This is what I bought from MS and it was impossible to do it without modifications.

However, the BK bar I had on that car was excellent and functioned as advertised. For the ones not familiar with BK, these guys build harness bars for many cars (Corvettes and Porsches as well as Mustangs, etc) and in our case with Ms, they provide a FULLY REVERSIBLE install that doesn't require drilling into the car or welding.
As a big plus, their bars are tested to DOT standards so they will actually work in the case of a crash.

I have to pause here to address the elephant in the room. Many people feel that unless you have a full cage or at least half a welded cage, race seats are instant screaming death on a stick. Those people also say it's better to run 3 points of the Schroth QFP than a 6 point and a harness bar.
I disagree completely, but here is what Schroth has to say about it. They may know a thing or two about safety.
Cliff notes: 6 points are safer than 3 points, period.
https://www.schrothracing.com/docs/TechTactics.pdf
Edit December 2020: the pdf is no longer on the website but here are the interesting pages:







Fast forward to 2016 and we buy a dedicated track car which is an E90, so given the great experience we had with their harness bar we wanted to go with them again. We had also heard they had developed seat mounts and wanted to use those instead of the MS garbage we already bought.


The only bad thing about a harness bar is you more or less lose the space where you'd put tires, so instead of carrying four tires in the back seat you're limited to just two. That doesn't cut it because sometimes you want slicks and other times -true story- you run into issues with NT01s and you have to bring spares.

These are the front seats


And here is how the rear looks when you carry two tires with the bar mounted. You can see one here and one in the trunk



However, if you remove just one bolt per side of the harness bar it folds on itself!


Tachan!



What should I do with that space? Here we go! 2 10.5" BW TE:AL wheels with 275 tires plus two spare 275 tires fit perfectly!
There is so much space I have no doubt 4 295s fit in there!




A view from the trunk



It still seems like there is a lot of space... so check this out!




And a view from the trunk


This is incredible. I can transport 6 spare wheels or tires to the track without a trailer or a roof bar! How awesome is that?

Last edited by SYT_Shadow; 12-10-2020 at 01:21 PM..
Appreciate 6
///Mobbin1478.00
Theodore668.50
dozaiya236.00
M3MPH1S592.00