An addition to this ; You will also need to remove the $5AG if your vehicle came with Alarm Prewiring to activate your interior MicroWave sensors before you default code your DWA module IF you add the sensors to your door trims.
Before removing $5GA:
VALUE_MUW_HL
wert_03
wert_05
VALUE_MUW_HR
wert_05
VALUE_MUW_VL
wert_05
VALUE_MUW_VR
wert_05
After removing $5GA:
VALUE_MUW_HL
wert_04
VALUE_MUW_HR
wert_04
VALUE_MUW_VL
wert_04
VALUE_MUW_VR
wert_04
Quote:
Originally Posted by RBB
Nice DIY. Installed the alarm a couple of weeks ago and finally got around to the coding this past weekend.
Did the coding myself and it was very simple. Add +K302 to your VO in both CAS and NFRM. After that use expert mode profile to code your DWAI, DWAS, CAS and CAPPL (if you have Idrive) modules to defaults.
I you're like me and had previously coded your CAS and CAPPL modules and don't want your changes overwritten then code DWAI and DWAS to defaults and change the following values in CAS and CAPPL.
|