View Single Post
      10-09-2013, 08:15 PM   #16
M3PO's Avatar

Drives: '08 IB E92
Join Date: Sep 2011
Location: OC

iTrader: (7)

Try re-downloading the file and flash again? Talk to the tuner?

Originally Posted by spool twice View Post
so was it the ventilation tube? or was it the low pressure sensor? I'm getting codes 275E (P1075) and 275D (P1072), my engine feels like it wants to stall and die, but then catches itself and the DCT basically "drops" the clutch like at 1,500 rpm on initial acceleration from a stop because the RPM overshoots to regain itself from dying. These codes weren't present prior to upgrading from OEM only 220E to 240E, but the 275D appeared after upgrading to OEM 240E-only (not aftermarket tuned) and I've been having this stumbling/dying feeling on initial acceleration and it's pretty annoying.

I cleared both codes and all seems well, but I'm sure they will come back. The problem doesn't appear to happen as much in "POWER" mode though, but it's still there and is a pretty dangerous situation, especially when trying to make a left hand turn and void oncoming traffic.
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R