Quote:
Originally Posted by ppatel14
I recently installed my do88 oil cooler and did an oil change on the full system. I used exactly 10 liters and oil level shows exactly in the middle. I was surprised there wasn't more oil within the cooler. I even drained the lines going to the oil cooler by bending them down a little to maximize drainage. I also take oil samples for analysis and I wouldn't be surprised if material shows up from the cooler.
My typical oil changes consists of warming up the engine, draining the oil overnight or couple days, and soaking up oil within oil filter housing. With this method I put in exactly 9 liters with oil levels showing near the middle or slightly higher.
|
Cheers, so the cooler contain around 1 liter, interesting. Sounds like draining the filter ca for 0.2L will not make a significant difference?