Hi Everyone,
We’re back with some updates from CarBahn Autoworks – this time regarding our S65 Engine builds. We are now offering two new variants of the CarBahn Autoworks built S65 engines, one 4.1L and the other a 4.5L, both intended for forced induction applications. The 4.1L bored engine features high performance over-sized forged pistons, a forged crankshaft with stock stroke, and high-strength forged Carrillo connecting rods. The totally cost of the build is $19,999.00 plus a donor engine. The bore is increased to 92.5 mm. Read more on the 4.1L engine here:
https://carbahnautoworks.com/product...harger-engine/
The 4.5L stroked and bored engine features over-sized forged pistons, a billet crankshaft with increased stroke, and high-strength forged Carrillo connecting rods. The bore is increased to 92.5mm and the stroke is increased to 83mm. The cost of this build is $24,999.00 plus a donor engine. Both are available with three possible compression rations, 10-1, 10.5-1 and 11-1. Read more on the 4.5L engine here:
https://carbahnautoworks.com/product...harger-engine/
These two new builds are in addition to two other street S65 engine variants we already produce. One 4.2L, the other a stroked and bored 4.6L available either with or without cams. All of these engine builds are intended for the E9x platform, or the motor swap of your choice
For a little taste of how these engines perform, check out this video of the 4.6L S65 on the Dyno:
Thanks all, any questions are welcome!