Quote:
Originally Posted by gerikivan
thx for being helpful.. so if i use a 5mm spacer will it clear the 285/35 all around.. im planning to get a fortune auto 500 on my m3 soon if i cant clear it and yes im gonna use 12mm spacer front and back...should we just discussed in private since it looks like im jacking the thread lol
|
It's a balancing act. While the spacer gives you more clearance on the inside, it takes away clearance on the outside.
I can fit the 10.5 Titan7's with 275 tires up front fairly comfortably (depending on tire brand) but I run -3.5* camber and have JRZ RS2 coils which have more clearance than stock.
I currently have my 18x10 ET25 ARC8's on my car with 265/35/18 tires. I have about 15mm of clearance on the outside. A 10.5" wheel would would push the sidewall out another couple of mm, then add another ~10mm on each side for the difference between a 265 and 285 tire and now I'd have about 3mm left. Not enough room for a 5mm spacer and I'm at -3.5* camber.
So, I highly doubt you'll fit a 285 tire up front with < 2* camber regardless of what spacer you run. You are going to start running out of room on the outside.
Best thing for you to do is to mount some tires on your Titan7 wheels, and do some measurements. Or measure your clearance with whatever wheels/tires are on your car now and do some calculations.