Just did the change for the second time. On the first time I used a pump and had all 4 corners up and leveled. This time I did the following.
Jack passenger side up and place stand.
Remove fill bolt followed by drain bolt.
Lowered car.
Jack driver side up and place stand.
Have a beer while it drains.
Lowered car.
Jack passenger side up and place stand.
Replace drain bolt and torque to 60nm.
Fill Diff with nearly 3 bottles of Castro's Syntrax.
Lower car.
Allow overflow to come out of the fill hole.
Have another Beer.
Jack passenger side up and place stand.
Replace fill bolt and torque to 60nm, clean off diff.
Lower car.
Have another beer.
Much easier and less clean up then my first go.
|