View Single Post
      06-05-2019, 04:35 PM   #880

Drives: 2009 ///M3 E92 APW 6MT
Join Date: Dec 2010
Location: South FL

iTrader: (0)

Garage List
2009 E92 M3  [0.00]
Originally Posted by drivetolive View Post
In the middle of this and almost at the finish line but hoping to get advice on a possible hiccup.

The "nipples" that attach to the TAs (highlighted in orange below) are not aligning with my TAs unless I move the nipple on the TA itself (thus moving the gear inside). Is this normal?

The new TAs are from M Power Motorsport if that makes a difference (rebuilt).
It's been a few years since I did mine, but if I remember correctly, The actuators will have spring tension on it when the butterflies are closed (off). You will need to pull up on the arm to make them line up. Then push the ball end back over the fitting.