Collected this front lip from Pom Performance over the winter. Finally got some time to install it.
Test fit (how it sat all winter in the garage lol)
20191213_231255 by
Steven Luong, on Flickr
20191213_231113 by
Steven Luong, on Flickr
20191213_231511 by
Steven Luong, on Flickr
20191213_231528 by
Steven Luong, on Flickr
20200129_165255 by
Steven Luong, on Flickr
Then went for a better shoot. Foggy weather to start. Probably will be shooting a lot more as its still okay during this quarantine business as I’ll usually just be by myself in the middle of nowhere.
garage queen for the day by
Steven Luong, on Flickr
DSC_9162-Edit by
Steven Luong, on Flickr
close up of front end by
Steven Luong, on Flickr
DSC_9163-Edit by
Steven Luong, on Flickr
Fog looked too cool not to pull over by
Steven Luong, on Flickr
E90M3 in the fog by
Steven Luong, on Flickr
Gloomy day by
Steven Luong, on Flickr
from the back by
Steven Luong, on Flickr
creep by
Steven Luong, on Flickr
from the front by
Steven Luong, on Flickr
oh so foggy by
Steven Luong, on Flickr
The lip was installed without removing the bumper. Drove it for only a day and realized it was quite loose with the oem screws. Done the proper way now. Bumper off and multiple drill points for nuts and bolts. Much tighter fit and feeling like its much more secured. 3M extreme mounting tape didn’t do much of a job as I wanted because there was too much gap in some areas that didn’t allow it to touch. Removing the bumper for install was definitely the way to go.
20200329_194627 by
Steven Luong, on Flickr