Quote:
Originally Posted by regular guy
CDB6
| CDB6 | | | Information saved in | DME | | Fault code | CDB6 | | Fault text | Diagnosis monitors the required torque. | | Fault description | Malfunction monitoring conditions The fault is detected if the torque is higher than the required torque. | | Condition for fault identification | Test condition: | | Temperature condition - None | | Time condition - None | | Other preconditions - None | | Terminal status - Terminal 15 | | Voltage precondition: Vehicle voltage between 9V and 16V | | Condition for fault memory entry | The fault is entered immediately. | | Action in service | Carry out bus system analysis | | Fault effect and breakdown warning | None | | Driver information | None | | Service instruction | None |
I found this description on BMW ISTA, but can't guarantee it's for M3.
|
what the hell does this mean though?
just saw this code pop up