|
I've seen $1500 in labor if including the side gaskets, which requires at least tilting the transmission down. The bottom pan alone might be $250 in labor.
Fluids and filters, I think $250 on ECS. If you want SSP viton seals/gaskets, those are $400 (side and bottom). I think the Slon pans, if you wish to go this route over gaskets, are $900 for bottom and $600 for the side.
So the low end would be $1200 or so (if you can find a cheap shop that can do the side without much more labor, and go with SSP gaskets) and the top end would be just over $3K with the billet pans and full labor. Note that the premier local shop to me cautioned against the small-hand approach to the side gasket because you aren't sure that you are seating the gasket perfectly all around.
|