View Single Post
      12-05-2012, 05:18 PM   #1
IMG
IMG's Avatar
United_States
1122
Rep
7,690
Posts

Drives: E36 M3 Track car,Ess E90 M3 DD
Join Date: Feb 2008
Location: Location

iTrader: (6)

ESS VT3-775 Low Compression Built Motor Dyno Results @ 14 PSI:683whp STD, 666whp SAE

BIG THANKS TO PG FOR PUTTING ALL THE DATA TOGETHER !
NOTE: ALL THE PARTS THAT CAME WITH THE ESS KIT IS WHAT I AM RUNING BESIDE THE BELT SYSTEM AND INJECTORS !

Car and Modifications:
  • 2008 BMW M3
  • ESS VT3-700 Low Compression Engine
  • ESS VT3-700 Supercharger kit @ 14.00 PSI Boost
  • Both CAT Delete
  • Modified Challege X-Pipe with 4 resonators
  • Akrapovic Slip-on Exhaust
  • 93 Octane
  • 6MT
Conditions:
  • Temparature:: 59.31 degrees F
  • Atmospheric pressure: 29.34 inHg
  • Humidity: 31%
  • Density Altitude: 2360 Ft.
  • SAE Correction: 0.982
  • STD Correction: 1.010
  • Uncorrected: 1.000
Results:
  • SAE Corrected: 666whp @ 8000 RPM, 439wtq @ 7700 RPM
  • STD Corrected: 683whp, 450wtq
  • Uncorrected: 678whp, 446wtq
Dyno Database:Individual Dyno Results:
The legend below has the following meaning:
  • Dyno Run: Dyno run file
  • Timestamp
  • Temp(F) = Temperature (Farenheit)
  • RelH = Relative Humidity
  • Pressure(Hg) = Barometric Pressure
  • DA(ft) = Density Altitude
  • WHP(unc) = Uncorrected wheel horsepower
  • WTQ(unc) = Uncorrected wheel torque
  • WHP(SAEd) = SAE Corrected Horsepower using Dynojet weather station.
  • WTQ(SAEd) = SAE Corrected Torque using Dynojet weather station.
Dyno Run
Timestamp
Temp(F)
RelH
Press(Hg)
DA(ft)
WHP(unc)
WTQ(unc)
WHP(SAEd)
WTQ(SAEd)
Run_022
10:51:47
59.31
32
29.34
781
659
440.8
647.2
433.2
Run_023
10:52:35
59.5
31
29.34
790
677.6
446.4
665.9
438.7


Graphs:
SAE Corrected:


HP, TQ, with IAT:


Air-Fuel-Ratio:



NOTE: AFR (Mearsured) = Dyno AFR sensors. AFR (Actual-B1), AFR (Actual-B2) are the BMW O2 sensors. There seems to be a difference between the two; a difference that is not normally seen during dyno tests. One or the other is out of calibration, and by the looks of it, the dyno AFR sniffer looks like it's out of calibration, as we can see in RunFile_023 the dyno AFR is completely wrong, but in RunFile_022 the dyno AFR matches BMW O2 sensors perfectly. Moral to the story: BMW O2 sensors are correct, but dyno RunFile_023 isn't.

STD Corrected:


Uncorrected:

Last edited by IMG; 12-23-2012 at 05:40 PM..
Appreciate 0