Quote:
Originally Posted by Makaveli7
Quote:
Originally Posted by slicer
Not sure what you mean by reusable. Are you asking if they can be repurposed? Sure, If there's something in your life that uses that same size screw. Are you asking if they are designed by SPL to be single use? No, the whole point of having adjustable arms is.... that you can in fact adjust them.
|
Oh what I got from SPL were there rear upper toe and camber arms and I think you were referring to the SPL front end links which would have the screws there n the ball joint.
https://www.turnermotorsport.com/p-5...s-with-el-kit/
https://www.turnermotorsport.com/p-5...ecamber-links/
I was asking if I should use the provided screws in the kit or use oem screws. |
I'm talking about the titanium screws in the collar that locks the arms in place (the small blue screws in the part pictured in your link). You are taking about something else.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc.
INSTAGRAM - @Slicer_M