12-26-2013, 11:50 AM
|
#3
|
Lieutenant Colonel
Drives: Sprint car
Join Date: May 2013
Location: California
|
273c - P2414
273C - P2414
273C - P2414 | | Information saved in | DME | Fault code | 273C - P2414 | Fault text | Oxygen sensor, part/full-load diagnosis, before cat., bank 1 | Fault description | O2 Sensor Exhaust Sample Error (Bank 1 Sensor 1) | Condition for fault identification | Test condition: Oxygen sensor voltage less than 4800 mV (K_LAVK_OBD_TL_SCHW_MAX) and greater than 3149 mV (K_LAVK_OBD_TL_SCHW_MIN) for a total of 1 (K_LAVK_OBD_TL_CNT) after a lag period before active functionality of 8s (K_LAVK_OBD_TL_T) seconds | . | Terminal condition: Engine running - Condition part-load or full-load | . | Voltage condition: None | Condition for fault memory entry | K_LAVK_OBD_TL_T- seconds (8s) lag frr K_LAVK_OBD_TL_CNT-attempts (1x) | Action in service | 1. Install oxygen sensor in exhaust system (oxygen sensor exposed to ambient air) | Fault effect and breakdown warning | MIL on after engine runs 2x Possible negative effects on drivability | Driver information | Warning light: MIL | Service instruction | None |
|
|
|