Quote:
Originally Posted by pbonsalb
With slave out but connected, orient with bleeder facing up. Open bleeder, depress piston and hold depressed while you close bleeder. Repeat 3x and there should be no air left. Challenging for one person alone but doable. Make sure level in brake reservoir does not drop below min or air could be sucked in.
|
Thanks for the reply. I will do this. I was doing that before, but I am sure air was entering from up top. I have ordered the Schwaben 3L pressure bleeder to assist with the bleed. I will also be using a bottle with hose and brake fluid. I had read several previous forums about this and there were many different methods from: 2 person with clutch, slave method, and pressure method with one or two people. Hopefully it will work, Ill post an update tomorrow evening after completing this.