Ok now I need help I have European style rdc
And I want to change it in Usa style
What need to change coding to work proper?
Tpm on ftm off
Quote:
Originally Posted by nolaman1970
Thank you guys for all of the info and replying/helping me.
I believe I was successful today. Last night I unplugged the RDC module "popsicle" behind the plastic cover inside of the rear right wheel well(2011 E93). I now do not have any low tire warning or malfunction warnings on the Dash or in IDrive. My left rear wheel sensor is dead, and I do not plan on replacing any of them. FTM now shows up in IDrive now, have not tested lowering a rear wheel's pressure yet, but I am 
Process followed:
VO Settings:
$2VB - Removed
$265 - Added
I was able to FA Write - CAS
I was not able to FA Write - LMA, LMA is not in my list at all.
All of the below settings are now set and verified after re-reading the modules.
CIC: RPA_CIC
aktiv
CIC: RDC
nicht_aktiv
CIC: RDC_SAFETY
nicht_aktiv
KOMBI: RDC_ALIVE
nicht_aktiv
KOMBI: MMI_ENA_RPA_RDC
aktiv
KOMBI: RDC_VERBAUT
nicht_aktiv
KOMBI: DSC_MIT_RPA_CC
aktiv
KOMBI: RDC_DISP_SWITCH
nicht_aktiv
M3DSC: (MK60_M3): RPA
aktiv
Next I will backup these modules and any others I changed.
All of my coding over the last week.
1) DTRL off in auto (this did work but my angel eyes are also off in auto)
2) Welcome disclaimer off
3) Folding mirrors with key fob .5 seconds
4) 5 Blink blinkers (custom code)
5) Lower Fuel Reserve Warning was 1/4 tank now 1/8 tank.
6) TPM off, FTM on
7) E93 Convertible open/close while moving slowly
If anyone knows how to keep the angel eyes on during the day in auto without DTRL that would be great.
Thank you for all of the help and information you guys are great!!! |