Quote:
Originally Posted by GORDON.M3
For manual car, you need to connect the 12V lead to the reverse light to be the trigger for the reverse camera. You may experience flickering or black screen due to the PWM state of how power is delivered to the accessories/lights on our cars. You need to purchase an additional 12v stabilizer or "rectifier" which is what they call it.
|
No you do not need to tap the reverse light.
Just need to connect red wire from camera to 12v + on MR12V. The camera RCa is obviously the video feed but also provides ground.
The trigger is set through the MR12V software. If you a have a manual with PDC this should be set as "parking key".