Quote:
Originally Posted by 6ixSpd
Setting the Height
The front struts/collars were set to three threads from the bottom up front out of the box. In the rear, I set the collars to 9 threads from the bottom. This sits at exactly the same height as the H&R Spring combo.
NOTE: I am using Ground Control Street camber plates which adds approx 5mm to the stack height. You may want to set your fronts with 5 or 6 threads showing if using OEM top mounts.
[
|
actually read entire post 2x to be sure. you stated that you are only 3 threads from bottom, and exactly at the H&R spring height. maybe i am not understanding this correctly...
i actually have B16 sitting in the box for about a year, just haven't gotten around to installing.