View Single Post
      02-26-2013, 01:41 PM   #17
Lieutenant General
CanAutM3's Avatar

Drives: 2015 M4 DCT
Join Date: Jan 2012
Location: Montreal

iTrader: (0)

Garage List
2018 Audi RS3  [0.00]
2015 BMW M4  [4.29]
Originally Posted by 1MOREMOD View Post
i agree very nice seeing 1 wheel up. can you comment further on that amount of negative camber. right now i have -2.5 front and -1.9 rear and need more particullarly in the front. was thinking of around -3 front and 2.2 rear?
My current set-up is -2.7 front and -1.8 rear.

I used to run -2.5 front and -2.0 rear. With that set up I was still eating the outside edges of my Nitto NT01s. This was confirmed with tire temperatures readings, the outside of the front tires were running a little hotter. In the rear, it is the inside temperature that were a little hotter at -2.0 camber.

With my new settings, I am seeing nice even temperature across the tire thread both front and rear. The fronts are now wearing nice and even .

However, -2.7 is starting to get a bit aggressive for the street. I am starting to wear the inside of my street tires... I guess I will have to live with this compromise .

It is important to note that optimal camber settings will vary depending on the type/brand of tire, tire size, suspension (height, stiffness), etc... I can only share what I have experienced with my setup