|
I just pulled the stoptech STreet Performance pads that came with my STR40 front kit out. The kit went on 4.5 years ago at 60,314 miles and I took the pads out at 114,633 miles. Everything came apart and will go back together very nicely, dust boots were still in perfect shape, etc. Impressive.
There's about 4-5mm of pad left with some taper and pitting here and there, they start at 16.5mm and these would not have been wise to track on with this little left, even if it was wise to track the street pad with this kit to begin with (it's not terrible, but wise isn't what I'd call it)
So there you have it. THe rotors still have >34mm of thickness. Minimum is 33mm.
DS2500's going back on, hope there's room for the thicker pad
|