Quote:
Originally Posted by jvictormp
I'm confused here (grateful for the DIY by the way, of course).
The subframe bushings are four: two big ones, and two small ones.
The two big ones (blue circled) should be installed with the lips facing the bottom.
And the two small ones (red circled) should be installed with lips facing the top.
Right?
But the picture of the OP shows that all of them were installed with lips facing bottom.
|
Hi. First of all, thanks for sharing your DIY job. I’m about to attempt this but with poly bushings for my rear subframe and differential. Before I start, just want to make sure I have all the parts needed ready. What are the bolts you replace while you’re in there doing the job? Or did you reuse the old ones? Either way, looking at the diagram below, bolts that you’ll untorq/torq’d are #6, 10, 11, 13 and 14. Could you kindly confirm this? Thanks man. Great job by the way.
https://www.realoem.com/bmw/enUS/sho...diagId=33_1408