I'd confirm orientation with the vendor/manufacturer, I made the mistake of beginning install of bw bushings in the same orientation as oem, which turned out to not be correct. Had to destroy the incorrect bushing to get it out and buy a whole new set to get the one I fudged up.
If you have the bw ones, they all go in bottom up like the op.
Quote:
Originally Posted by jvictormp
I'm confused here (grateful for the DIY by the way, of course).
The subframe bushings are four: two big ones, and two small ones.
The two big ones (blue circled) should be installed with the lips facing the bottom.
And the two small ones (red circled) should be installed with lips facing the top.
Right?
But the picture of the OP shows that all of them were installed with lips facing bottom.
|