[tom @ eas]

Originally Posted by THE TECH

You can check out the link to the manual in this post: http://www.m3post.com/forums/showpos...8&postcount=64

It shows a wiring diagram but doesn't tell me what each wire does. Maybe you know better than I.

Instructions state that power line is KL30, which requires constant power.



Disregard the orange/green harness w/ terminal connectors, as this is related to something else.

PIN3 on the JBE module (, left side connector, red/blue wire) will provide constant power for the PSW. PIN6 can be used for ground.

Hope this helps!