View Single Post
      07-14-2019, 05:14 PM   #226
///My5UV's Avatar

Drives: YMB F80, SS E90
Join Date: Nov 2010
Location: Austin

iTrader: (0)

It was over a year before I got around to putting this in, now halfway through. I think it probably could have been made of thinner stock for an easier install. One trick I've hit upon so far.. I used two foot-tall boxes to hold the weight of the side pieces while pushing the middle into place between the bumper cover and the lower radiator trim (or whatever that curved part is). I'll try a trick from post 80 to use longer screws to get the rear in place since the stock ones barely have any thread engagement given how thick this piece is!