Quote:
Originally Posted by sgreer78
I had vibration on the front with 12mm Turner spacers, with 10mm Turner's the vibration is gone. This was on OEM ZCP 19x9's. Both were balanced and road forced.
|
Interesting I thought 10mm spacer wasn’t recommend? Turner site has this following note, and I also remember some members talked about it:
“10mm Fitment Note: You must be very careful when fitting 10mm spacers to any BMW. Since the depth of the hubcentric lip will vary, you risk bottoming out of the spacer before it sits flush with the hub. This will leave a gap between the spacer and the hub, seriously compromising the strength of the spacer. The lip on the car may need to be shaved down so the 10mm spacer will fit flush on the rotor hat.“