Drifting Tree: 403whp @ 8045 RPM, 313wtq @ 3025 RPM
Car and Modifications:- 2009 BMW M3
- RD Sport 4.6L "Stroker" Motor
- Akrapovic Evolution Exhaust
- 6MT
- 95.5 Octane
Conditions:- Temparature:: 78.07 degrees F
- Atmospheric pressure: 30.04 inHg
- Humidity: 25%
- SAE Correction: 0.979
- STD Correction: 1.006
- Uncorrected: 1.000
Results:- SAE Corrected: 403whp @ 8045 RPM, 313wtq @ 3025 RPM
- STD Corrected: 414whp, 322wtq
- Uncorrected: 412whp, 320wtq
Dyno Database:
Dyno Results: SAE-Corrected
Dyno Results: STD-Corrected
Dyno Results: Uncorrected
Video:
Individual Dyno Results:
Individual dyno results are shown below. SAE corrected results are shown twice, using two different sources. The first source (SAEd) are the SAE corrected results straight from the Dynojet. The second source (SAEk) of SAE corrected results are obtained by using the Kestral 4500 weather station data for each individual dyno run and running it through an independent SAE correction formula. This ensures that the dyno results are accurate and can be independently audited and verified for authenticity and accuracy.
The legend below has the following meaning:
- Dyno Run: Dyno run file
- Boost Avg: Boost calculated using trend line. This is the "official" boost for this dyno run.
- Boost Peak: Peak boost observed on this dyno run.
- Temp(F) = Temperature (Farenheit)
- RelH = Relative Humidity
- Pressure(Hg) = Barometric Pressure
- DA(ft) = Density Altitude
- WHP(unc) = Uncorrected wheel horsepower
- WTQ(unc) = Uncorrected wheel torque
- WHP(SAEd) = SAE Corrected Horsepower using Dynojet weather station.
- WTQ(SAEd) = SAE Corrected Torque using Dynojet weather station.
- WHP(SAEk) = SAE Corrected Horsepower using Kestrel 4500 weather station.
- WTQ(SAEk) = SAE Corrected Torque using Kestrel 4500 weather station.
| Dyno Run | Temp(F) | RelH | Press(Hg) | DA(ft) | WHP(unc) | WTQ(unc) | WHP(SAEd) | WTQ(SAEd) | WHP(SAEk) | WTQ(SAEk) |
| Run_001 | 67.6 | 57.8 | 29.88 | 775 | 404.7 | 312.1 | 395.3 | 304.9 | 396.5 | 305.8 |
| Run_002 | 67.5 | 58.5 | 29.88 | 771 | 409.7 | 316.9 | 401.1 | 310.3 | 401.4 | 310.5 |
| Run_003 | 67.6 | 59.9 | 29.88 | 768 | 412.1 | 320.1 | 403.4 | 313.4 | 404.4 | 313.8 |
* Entry used for the Dyno Database
Macedog: 426whp @ 7465 RPM, 331wtq @ 5940 RPM
Car and Modifications:- 2006 BMW M5
- RPI Scoops
- BMC Air Filter
- SMG
- 91 Octane
Conditions:- Temparature:: 80.69 degrees F
- Atmospheric pressure: 30.03 inHg
- Humidity: 26%
- SAE Correction: 0.983
- STD Correction: 1.011
- Uncorrected: 1.000
Results:- SAE Corrected: 426whp @ 7465 RPM, 331wtq @ 5940 RPM
- STD Corrected: 437whp, 340wtq
- Uncorrected: 433whp, 337wtq
Dyno Database:Dyno Results: SAE-Corrected
Dyno Results: STD-Corrected
Dyno Results: Uncorrected
Video:
Individual Dyno Results:
Individual dyno results are shown below. SAE corrected results are shown twice, using two different sources. The first source (SAEd) are the SAE corrected results straight from the Dynojet. The second source (SAEk) of SAE corrected results are obtained by using the Kestral 4500 weather station data for each individual dyno run and running it through an independent SAE correction formula. This ensures that the dyno results are accurate and can be independently audited and verified for authenticity and accuracy.
The legend below has the following meaning:
- Dyno Run: Dyno run file
- Boost Avg: Boost calculated using trend line. This is the "official" boost for this dyno run.
- Boost Peak: Peak boost observed on this dyno run.
- Temp(F) = Temperature (Farenheit)
- RelH = Relative Humidity
- Pressure(Hg) = Barometric Pressure
- DA(ft) = Density Altitude
- WHP(unc) = Uncorrected wheel horsepower
- WTQ(unc) = Uncorrected wheel torque
- WHP(SAEd) = SAE Corrected Horsepower using Dynojet weather station.
- WTQ(SAEd) = SAE Corrected Torque using Dynojet weather station.
- WHP(SAEk) = SAE Corrected Horsepower using Kestrel 4500 weather station.
- WTQ(SAEk) = SAE Corrected Torque using Kestrel 4500 weather station.
| Dyno Run | Temp(F) | RelH | Press(Hg) | DA(ft) | WHP(unc) | WTQ(unc) | WHP(SAEd) | WTQ(SAEd) | WHP(SAEk) | WTQ(SAEk) |
| Run_001 | 64.3 | 64.9 | 29.87 | 567 | 432.7 | 339.7 | 424.1 | 333 | 422.7 | 331.8 |
| Run_002 | 66.2 | 64.7 | 29.87 | 708 | 433 | 336.5 | 425.9 | 330.9 | 424.4 | 329.8 |
| Run_003 | 65.9 | 65.5 | 29.87 | 689 | 431.5 | 331.9 | 424.9 | 326.8 | 422.8 | 325.1 |
* Entry used for the Dyno Database