Quote:
Originally Posted by tom @ eas
All lamp functions work properly:
Brake (Single and Dual stage)
Blinker Indicator/Hazard
Reverse Lamp
Running Lamp
There is a slight amount of LED flicker at startup due to BulbCheck sending voltage pulses through the system in order to verify bulb operation - this only happens for about a second and will not damage the lamp or LCM. You will also receive Bulb Out errors since the FRM does not detect resistance through a LED system.
Once coding is performed, this will all be corrected.
|
Do the blinkers still blink fast (similar to a bulb being out) without coding?