Well yesterday was a bust (kind of.) Lack of communication from the shop with the dyno between the scheduler and the technician led to a 40 minute delay to get the car on the dyno, poor Randy was sitting around the whole time. Then found out that they didn't download the required software for Randy to remote in even though they had the info for a month, frustrating. Even more frustrating was the fact they couldn't after trying because their laptop with the dyno is windows 7 and is too old, I really couldn't make this up if I tried.
So no tuning done yesterday but we did rip it for one pull on the base map. This is a Dyno Dynamics AWD dyno but according to the technician they've adjusted it to read closer to a mustang or dynojet. 425rwhp and about 330ft lbs. More importantly I have over 300ft lbs from 3k up to about 6,500 if I remember right.
My dumb a$$ left the dyno sheet in the car, will get this weekend and post, but until then here is a Youtube Short from the pull:
https://www.youtube.com/shorts/GEJBDmbqi5I
Rubin