Quote:
Originally Posted by Fezza
so stuck injector experts, I recently came across a video on YT and was wondering if it's a good/easy way to check if our injectors are leaking and on their way out (watch at 21:30):
obviously not the one that's gushing but the #3 that dripping in the video. if so then it would be a pretty easy way to check the health of our injectors. |
Thanks for posting this educational video. We can now actually "see" the issue(s). The gushing injector at the 21min.40s time stamp seems like it would cause more of an instant hydrolock but a dripping injector (also shown the video when the fuel pump is primed) is just as bad and will also cause bent rods and cracked pistons etc. if not also "window" the block. Liquids are incompressible and there is no room in the combustion chamber for un-atomized fuel. Thanks again.
.