[nickauger]

Hi guys, long story short, I 99% completed manual to DCT swap myself and have a remaining problem.

Paddle shifter do not work and have 005A73 code.

Test i have done:

Continuity test from clockspring to dct transmission OK

voltage in pin 4(clockspring) or EGS_Up is at 7.16V

voltage in pin 6(clockspring) or EGS_down is 0V

When I erase the code, it come back at key ON instantely.

I have steering multifonction switch on Order but don't think its that.

Also I have a lithium battery , i've read paddle shifter un voltage sensitive?

Any help would be apreciated thanks.