View Single Post
      11-11-2025, 05:12 AM   #5
FN2M3
New Member
14
Rep
25
Posts

Drives: M2C
Join Date: Jun 2022
Location: UK

iTrader: (0)

Quote:
Originally Posted by tsk94 View Post
I think you'll run into issues on the rear (front should be no problem).
I run a 18x11" +44 with a 12mm spacer, also with 295/35R18 as my street/rain setup. I'm at closer to -2.5*. I would have big issues coming out 8mm more and half a degree LESS negative camber. Unless you're at a seriously high ride height, I'd quite confident you will rub pretty bad, or simply hit the fender under compression.

If you step down to a 295/30R18, then you might be able to pull it off with the 20mm spacers. The 295/30 has been done with that effective +24 offset (might still need more camber though). But with the 35 profile, I think the tire will be too tall for the offset.
Or, run more camber.

Hey man. Apologies - edited first post. I am indeed running 295/30 on the rear. (Not 35)

Really? I thought it would be the front that would cause issues.

I would be going from an effective 295/30 ET24 to an 275/35 ET30 but half an inch narrower rim?
Appreciate 0