View Single Post
      12-27-2024, 02:25 PM   #1
former 240 s14
Lieutenant
former 240 s14's Avatar
559
Rep
511
Posts

Drives: 2008 E92 S65 Track Rat
Join Date: Jan 2007
Location: Cincinnati Ohio

iTrader: (0)

Help Needed MCS 2NWR Track Spring/Damper Setup

Trying to utilize the knowledge of the community for some adjustments on my MCS 2NWR with 600F 900R 2.25 HyperCo Springs and 275/35/18 RE71RS. Car is just under 3400lbs without me in the car. The car sits just above the top of the tire (not even a finger width between the fender line and top of the tire. Initial Damper settings were a bit messy with Front Compression 9 and rebound 11.

My first two events I noticed the car was WAY too low and is prohibiting the damper to travel enough. The car is not happy with curbs so I know I need to adjust the ride height.

Question #1

Is there a good starting ride height you've noticed to increase suspension travel but not over lift the car?

Question #2

I have reset the Front Compression to 8 and Rebound to 12. Rear Compression to 6 and Rebound to 10. Does anyone have a better suggestion based off experience?


Appreciate any insight with people running similar setups and tire.

Rubin
Appreciate 0