Quote:
Originally Posted by amrazM
dinan throttle body install outlined how to adjust these IIRC, youre not supposed to adjust the stock ones but hopefully there is a document outlining how to bring them back into calibration.
|
Hey thanks for the info. I looked at Dinan's instruction and it referenced back to BMW TIS #1354010 procedure for adjustment, which is the Throttle Valve Basic Setting based off of the idle stop screw settings from factory to work with, lol. I did learn something about which correct bolt to use for the actuating rod however.
From what I read, the Honda guys are doing 1 full turn in with the screw from contact with the actuating lever while the valve is at soft close position. I'll start from there and see how it goes...