Quote:
Originally Posted by tsk94
That's disappointing to hear.
I can't test fit them on the car - it's currently away in storage. I do have a set of Storm uprights though that I can see if the holes up line at all. But in terms of rotor clearance, I won't know until the spring when everything gets installed.
|
got it. yeah, the holes lined up (i think), it was the height of the standoff that's the issue. the bottom one pushed the plate into the rotor. had it been the other way i could shim it, but this way you basically have to bend in a new height to the standoff, and drill a new hole. Possibly doable, but I think it would overlap with the existing one so you'd have too big an opening. I said screw it and ordered the burkhart set.
__________________
Current '21 DG X5MC, '22 X5M50i, '11 E90 M3
Recent Past '12 E92 M3 ZCP, '08 E93 M3, '18 F80 ZCP, '04 E46 M3
I think I have an M3 problem.