[M3MATT]

Originally Posted by slicer

GT4 Wheels are on the car! They look fantastic and fitment appears to be a success.

Unique Wheel Property -
This wheel has a back pad that is 15mm thicker than anything that I have seen. As a result, the stud required is at least 15mm longer than typical. There is no stud currently on the market that will accommodate this wheel with a 12mm spacer. BMW's own GT4 studs are designed to accommodate a 32mm spacer - yes you read that correctly - BMW is using a 32mm front spacer on the M4GT4! I am not sure why the wheel was built with that spec but my assumption is that it's due to strength requirements. As a result, we are working with MSI (leading stud manufacturer) to create a custom stud length for this wheel.

[img]https://live.staticflickr.com/65535/48537195302_a24cf0f12d_b.jpg[/img]GT4 by slicerM, on Flickr
[img]https://live.staticflickr.com/65535/48537051371_d1434afd22_b.jpg[/img]GT4 by slicerM, on Flickr
[img]https://live.staticflickr.com/65535/48537051336_4dc28e4cd6_b.jpg[/img]GT4 by slicerM, on Flickr

[img]https://live.staticflickr.com/65535/48537195182_1d8dc1e5ab_b.jpg[/img]GT4 by [...]

How much camber did you have to run up front? I have ohlins DT and am wondering if I would need a bigger or smaller spacer and trying to gauge how much camber I’d need