|
saved from search notes:
## Code out edc
1) Disconnect EDC module. It's located on the passenger side rear quarter panel, accessible through the trunk. It's the module with 2 connectors (white and blue). Can't miss it.
2) Remove option $233 from Vehicle Order in CAS using FA_write; then change ECU and FA_write the NFRM.
3) In KOMBI set EDCK_ALIVE_ZAEHLER to nicht_aktiv and EDCK_ID_MONITOR to nicht_aktiv.
4) If you have the first gen idrive (08) in CAPPL set EDC to nicht_aktiv. / if you have the later idrive in CIC set EDC_CIC to nicht_aktiv
|